PPPoE Configure Step by step on MikroTik router

PPPoE Configure

Internet service provider (ISP) will give user id and password such as ISP  has given user name : test password: test. Now I will configuration MikroTik router step by step:
WAN Site configure (Step1 to Step2)
Step 1: winbox >Interfaces + PPPoE Client > General > select ether1 > Apply > OK
Step2: Interface + PPPoE > Dial Out > user =test > Password > Apply > OK
LAN Site Configure (Step1 to Step4)
Step1: PPP > PPPoE servers + Interface= ether5 > One sesson per host(select) > Apply > OK
Step2: PPP > Profiles + General > Name=512k > DNS=8.8.8.8 > Apply > OK
Step3: PPP > Profiles + Limits > Rate Limit(rx/tx) =512k/512k > Apply > OK
Step 4: PPP > secrets + Name=test > Password=test123 > Profile=512k, Local address=172.16.0.1(N.B Gateway) > Remote Address =172.16.0.10 >Apply > OK

Comments

Post a Comment

Popular posts from this blog

How to Block windows update in mikrotik

Image
i dont have the smartest people in the world (what else is new) and the problem is they complain about slow internet when infact windows update is doing its thing in the background and slowing the connection thats already not so fast. /ip firewall layer7-protocol add name="windows update " regexp="^.+(http://windowsupdate.microsoft.com|http://*.windowsupdate.microsoft.\     com|https://*.windowsupdate.microsoft.com|http://*.update.microsoft.com|https://*.update.microsoft.com|\     http://*.windowsupdate.com|http://download.windowsupdate.com|http://download.microsoft.com|http://*.dow\     nload.windowsupdate.com).*\$" /ip firewall filter add action=drop chain=forward comment="windows update Drop" layer7-protocol="windows update " src-address=\     192.168.128.0/24 add action=drop chain=input dst-port=21-23 protocol=tcp
Read more

Graphing In Mikrotik

Image
Interface Graphing Submenu level:  /tool graphing interface Description Shows how much traffic is passed through an interface over a period of time. Property Description allow-address  ( IP address / netmask ; default:  0.0.0.0/0 ) - IP address range which is allowed to view information about the interface. If a client PC not belonging to this IP address range tries to open  http://[Router_IP_address]/graphs/ , it will not see this entry interface  ( name ; default:  all ) - name of the interface which will be monitored store-on-disk  (yes | no; default:  yes ) - whether to store information about traffic on system drive or not. If not, the information will be stored in RAM and will be lost after a reboot Example To monitor traffic which is passed through interface  ether1  only from local network  192.168.10.0/24 , and write information on disk: [admin@MikroTik] tool graphing interface> add interface=ether1 \ \... allow-address=192.168.10.0/24 store-o
Read more

BDCOM SWITCH Essential Command

  BDCOM Series is a new-generation smart access switch designed for carrier’s IP MAN and enterprise networks. Based on the new-generation high-performance hardware and BDROS platform, it supports functions such as ACL, QinQ and QoS 1. Setup interface vlan-id 2. Setup ip addres 3. Assign vlan-id at interface 4.configure default gateway 5. show ip addres on vlan-id ***** show interface vlan-id ********** 6. Configure Username Password Enable for console and Telnet****** aaa authenication login default login aaa authenication enable default enable username bdcom password bdcom enable password bdcom service password encription ********* 7. Duplex Setting PALTAN-BDCOM>ena PALTAN-BDCOM#conf PALTAN-BDCOM_config#interface gigaEthernet 0/1 PALTAN-BDCOM_config_g0/1#duplex ? auto — Enable AUTO duplex configuration full — Force full duplex operation half — Force half-duplex operation PALTAN-BDCOM_config_g0/1#duplex 8. Setting speed option PALTAN-BDCOM#config PALTAN-BDCOM_config#interface gigaEt
Read more