Static IP Address on MikroTik Router

Static IP Address on MikroTik Router

There are three way we can configure MikroTik  Router for WAN side. Basically Static, DHCP, PPoE. Today we will configure about static. ISP has  given IP address, subnet mask and Gateway such as IP address: 192.168.0.0/24,  Gateway: 192.168.0.1,  Subnet Mask: 255.255.255.0, so we can start configuration.

WAN Site configure ( Step1-Step3)

 

Step 1. winbox open: IP > Address  + address =such as( 192.168.0.1/24 ) > Interface = ether3 > Apply > OK

Step 2: IP  > Routes > Gateway + = such as( 192.168.0.1 ) > Apply > OK

Step 3: IP > DNS > DNS Settings > servers= 203.122.120.2
= 203.122.120.3
= 8.8.8.8

LAN Site configure ( Step1-Step3)

Step 1. winbox open: IP > Address  + address =such as( 10.10.0.1/24 ) > Interface = ether4 > Apply > OK

Step 2: IP > Firewall > NAT  + General > Chain=srcnat  > Src. address=10.10.0.0/24 > Action > Masquerade > Apply > OK

 Step 3: IP > Firewall > NAT> + action > masquerade> Apply >ok